cable adjusters
90 degree carb top cable adjuster £9.00 each
This adjuster accepts a 6mm cable ferrule.
The plain end of the adjuster fits inside the existing straight threaded adjuster
in your carb top. This allows you to spin off the carb top without disturbing the cable.
007-731
This adjuster accepts a 6mm cable ferrule.
The plain end of the adjuster fits inside the existing straight threaded adjuster
in your carb top. This allows you to spin off the carb top without disturbing the cable.
007-731
45 degree carb top cable adjuster £8.30 each
This adjuster accepts a 6mm cable ferrule.
Screws into the M6 threaded hole in the carb top of most
VM & TM carbs.
I-M22-10-3
Currently not available
This adjuster accepts a 6mm cable ferrule.
Screws into the M6 threaded hole in the carb top of most
VM & TM carbs.
I-M22-10-3
Currently not available
45 degree stainless steel carb top cable adjuster £12.60 each
As the I-M22-10-3 Mikuni adjuster above is not available from Mikuni with no date for its reintroduction, I have had a batch of these adjusters made in stainless.
I took the opportunity to delete the thread on the carb end which is a real design
fault.
This version is a clearance fit into a 6mm straight adjuster (shown but not included) This allows the carb top cap to be screwed on or off without disturbing the cable.
As the I-M22-10-3 Mikuni adjuster above is not available from Mikuni with no date for its reintroduction, I have had a batch of these adjusters made in stainless.
I took the opportunity to delete the thread on the carb end which is a real design
fault.
This version is a clearance fit into a 6mm straight adjuster (shown but not included) This allows the carb top cap to be screwed on or off without disturbing the cable.
straight carb top cable adjuster £3.55 each
M21/14 accepts 6mm cable ferrule
VM28/256 accepts 7mm cable ferrule
M21/14 accepts 6mm cable ferrule
VM28/256 accepts 7mm cable ferrule
locknut cable adjuster £1.16 each
B30/247
B30/247
rubber cable boot £3.05 each
VM26/46