Mikuni Pilot & Air Jets
Never quite worked out the complete refusal of customers to quote Mikuni part numbers when ordering pilot jets, "the one with 8 bleed holes" or "12mm long" don't work for me. The correct part numbers are all below, I can't make it any more simple.
Please do a bit of homework BEFORE you call me to order jets!
You need to take a jet from your carb and compare it to the photos and dimensions below.
You should quote:
jet type ie. VM28/486
jet size ie. #27.5
quantity required
It really helps if you have this information ready before you call me.
Please make sure you have ordered the correct type and size
PLEASE NOTE JETS ARE NON RETURNABLE WITH NO EXCEPTIONS
Please do a bit of homework BEFORE you call me to order jets!
You need to take a jet from your carb and compare it to the photos and dimensions below.
You should quote:
jet type ie. VM28/486
jet size ie. #27.5
quantity required
It really helps if you have this information ready before you call me.
Please make sure you have ordered the correct type and size
PLEASE NOTE JETS ARE NON RETURNABLE WITH NO EXCEPTIONS
Mikuni BS30/97 Air Jet £5.20 each
Meters the air flow through the passage to and into the needle jet. It acts as a fine tuning component in regulating the fuel-air mixture. This is especially important when a bleed type needle jet is used. Used to modify GT750 Suzuki CV carbs for anti-surging (#0.8) available in the following sizes #0.5, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.5, 2.0 thread is M4 x 0.7mm |