New Replacement Parts
By cross referencing genuine available Mikuni parts with obsolete OEM parts we can offer some key carburettor parts which are not available from other suppliers. We modify genuine Mikuni parts to fit OEM applications or have small batches of other obsolete parts made to our specification.
There is a selection below of parts we have available. These are all either genuine Mikuni parts or parts we have remanufactured. Please call me if you find the part you need is obsolete as we may have a genuine Mikuni alternative.
There is a selection below of parts we have available. These are all either genuine Mikuni parts or parts we have remanufactured. Please call me if you find the part you need is obsolete as we may have a genuine Mikuni alternative.
|
Pull Up Starter Rubber Cap
Fits the knurled top starter plunger for the VM30 - VM44 Mikuni have never made the corrrect rubber cap for the knurled pull up starter available to buy as a separate part.I've tried for years to get Mikuni to sell them with no luck. We've had a quantity manufactured here in the UK and I'm very pleased with the result. The photo shows the incorrect rubber cap you'll get from everyone else on the right (VM20/455) and our correctly fitting cap on the left, £4.00 each |
|
Needle Kawasaki H1 500
The OEM Kawasaki needle 5DJ19 is obsolete and not available from Kawasaki or Mikuni.
There are pattern needles available from several companies, some are really poor and some work ok.
We can supply an alternative genuine Mikuni needle which makes most H1's run better than with the factory needle!
I have very positive feedback from owners who have fitted these.
These alternative needles are no longer in production and I have limited stock. As they say, when they're gone, they're gone.
£12.50 each
Call Steve on 0151 924 5383 to order.
http://www.kawasakitriplesclub.net/forum/viewtopic.php?f=12&t=10898
The OEM Kawasaki needle 5DJ19 is obsolete and not available from Kawasaki or Mikuni.
There are pattern needles available from several companies, some are really poor and some work ok.
We can supply an alternative genuine Mikuni needle which makes most H1's run better than with the factory needle!
I have very positive feedback from owners who have fitted these.
These alternative needles are no longer in production and I have limited stock. As they say, when they're gone, they're gone.
£12.50 each
Call Steve on 0151 924 5383 to order.
http://www.kawasakitriplesclub.net/forum/viewtopic.php?f=12&t=10898
Needle jet / Nozzle
Yamaha part number 510-14141-52 not available from Yamaha
Fits Yamaha
IT465H 1981
IT465J 1982
IT490K 1983
IT490L 1984
£17.50 each
Yamaha part number 510-14141-52 not available from Yamaha
Fits Yamaha
IT465H 1981
IT465J 1982
IT490K 1983
IT490L 1984
£17.50 each
Needle jet / Nozzle
Fits Kawasaki H2 750 171 O-6 Kawasaki part number 16017063 (check number on your part first)
not available from Mikuni or Kawasaki
Genuine Mikuni needle jet. Direct replacement for 171 O-6 Kawasaki OEM part
£17.50 each
Fits Kawasaki H2 750 171 O-6 Kawasaki part number 16017063 (check number on your part first)
not available from Mikuni or Kawasaki
Genuine Mikuni needle jet. Direct replacement for 171 O-6 Kawasaki OEM part
£17.50 each
Needle jet / Nozzle
Fits Kawasaki H1 500 B/D/E/F 172 O-4 Kawasaki part number 16017062 (check number on your part first)
not available from Mikuni or Kawasaki
Genuine Mikuni needle jet. Direct replacement for 172 O-4 Kawasaki OEM part
£17.50 each
Fits Kawasaki H1 500 B/D/E/F 172 O-4 Kawasaki part number 16017062 (check number on your part first)
not available from Mikuni or Kawasaki
Genuine Mikuni needle jet. Direct replacement for 172 O-4 Kawasaki OEM part
£17.50 each
Needle jet / Nozzle
Fits Suzuki T250R / T250J 164 O-2 Suzuki part number 09494-00075
Not available from Mikuni or Suzuki
We have modified genuine Mikuni O-2 size needle jets to the same pattern as the original 164 series needle jet.
These needle jets are genuine Mikuni parts and are a direct replacement for the OEM Suzuki 164 O-2 needle jet.
£36.00 each
Fits Suzuki T250R / T250J 164 O-2 Suzuki part number 09494-00075
Not available from Mikuni or Suzuki
We have modified genuine Mikuni O-2 size needle jets to the same pattern as the original 164 series needle jet.
These needle jets are genuine Mikuni parts and are a direct replacement for the OEM Suzuki 164 O-2 needle jet.
£36.00 each
|
|
Needle valve / Float valve
Yamaha part number 23X-14107-35-00
This is the 6 hole needle valve with a #3.5 flow rate as fitted to many VM38 OEM Yamaha competition carburettors.
£24.95 each
Setter Needle jet
Yamaha part number 509-14145-00
Fits VM38 carbs fitted with 247 series needle jet
New stock made in UK very good quality
No longer available from Yamaha or Mikuni
£9.80 each
Yamaha part number 509-14145-00
Fits VM38 carbs fitted with 247 series needle jet
New stock made in UK very good quality
No longer available from Yamaha or Mikuni
£9.80 each
Inlet Adapter / Flange Mount / Intake Manifold
Yamaha part number 3G2-13555-00
New stock made in UK very good quality
Supplied with stainless clip
70 x 38 x 43 x 8mm
£26.60 each
Spring Seat Plate TZ350 VM38 power jet carburettor and many others
Yamaha part number 509-14136-00
Suzuki part number 13629-40200
Laser cut in stainless steel these plates replace the factory OEM part which is now obsolete
£9.76 each
Throttle valve TZ350 VM38 power jet carburettor
We have new UK manufactured throttle valves which fit the 3G3 type carbs
Available in a #3.0 cutaway with the guide slot on the left or right side
Hard anodised and Teflon coated
Over 220 sold to date
£65.00 each
Suzuki PE & RM models Float Valve / Needle Valve
We have stock of the push-in type float valve with O-ring fitted to early '80's Suzuki PE and RM models
The Suzuki part number is 13372-40600 superseded to 13370-40600
These are genuine Mikuni valves in the correct #3.0 flow rate
Current Suzuki price is £56.39 each
Our price for the genuine Mikuni valve is £22.60 each (includes O-ring)
